Lokko Euro Cylinder Lock Picking Vice Support
Temporarily out of stock. You can still order now to reserve yours, and we'll ship it the moment it's back in stock.
FREE Basic Lock Pick Guide
FREE Basic Lock Pick Guide
Our short 30-page How to Pick Locks PDF online guide will be sent to you free after you purchase any lock pick set.
We do have 2 amazing real book upgrades customers love:
1. Illustrated 60 page Lock Picking Glossy Guide Booklet
2. Definitive 180 page Full Colour Visual Guide Book for all Lock Pickers
About this Item
About this Item
Descripción
Descripción
Hold a euro cylinder so the plug can actually turn
Clamp a euro cylinder straight into a bench vice and the cam catches on the jaws. The plug fights you, the lock sits at an awkward angle, and you end up fighting the setup instead of reading the pins. This Lokko support fixes that. It cradles the cylinder at the right spacing so the cam stays clear and the plug rotates freely while you pick.
A small support that makes vice practice realistic
A euro cylinder is the long, profile-shaped lock body you see in most modern UPVC and aluminium doors. To practise picking one at the bench you want it held still, with the keyway facing you and nothing blocking the plug from turning. The trouble is the cam, the metal tab that sticks out underneath. Clamp the cylinder directly and that cam jams against the vice jaws, so the plug cannot rotate and the lock will not give even when your pins are set.
This support solves it by seating the cylinder at the correct height and spacing. The cam hangs in clear air, the body sits secure, and the lock behaves the way it would in a real door. You get honest feedback from your picks instead of feedback fouled by a bad mounting.
Seat the cylinder, clamp the support, then pick
Drop your euro cylinder into the support so the cam sits in the cut-out and the keyway faces you. Place the support in your bench vice or clamp and tighten until everything is held firm. Now the cylinder is steady, the cam is clear, and the plug is free to turn the moment your pins reach the shear line.
From there you pick as normal: light tension on the plug, set each pin stack, and let the core rotate. Because the lock is mounted properly, every bit of feedback you feel is coming from the pins and not from a cam catching on the jaws.
Cleaner feedback, longer sessions
Cam stays clear
The cut-out gives the cam room to hang free, so the plug can rotate fully instead of binding on the vice.
Realistic angle
The cylinder sits the way it would in a door, so the motion you learn at the bench carries over.
Hands free to pick
The vice holds the lock. Both your hands stay on the tension wrench and pick where they belong.
One focused job
No improvising with rags or offcuts to space the cam. Drop it in and get on with practice.
Set the bench, then put in the reps
Steady mounting will not pick the lock for you. Real opens still come down to your tension hand, your pick control, and the lock itself. What this support does is take the setup out of the equation so the practice you put in actually counts.
What to know before you buy
| Brand | Lokko |
| Type | Bench accessory, euro cylinder vice support |
| Made for | Holding euro profile cylinders for picking practice |
| How it mounts | Seats in a bench vice or clamp, keeps the cam clear of the jaws |
| Weight | 23 g |
Build the bench around it
Lock Pickers Vice Mk2
The dedicated vice this support is made to sit inside. Together they hold practice cylinders rock steady on the bench.
Dangerfield Eureka Practice Locks
Give the support a clear target. Repinnable practice locks let you ramp difficulty as your fingers learn the feedback.
Dangerfield Serenity Picks
Ten bare 301 stainless picks with a leather wallet for clean, direct pin feedback while you practise.
Quick answers from the LockPickWorld bench
What does this support actually do?
It holds a euro cylinder in your vice so the cam stays clear of the jaws. That lets the plug turn freely while you pick, instead of jamming against the vice.
Do I need a separate vice?
Yes. This is the support that cradles the cylinder. It sits inside a bench vice or clamp such as the Lock Pickers Vice Mk2, which supplies the grip.
Is it useful if I am still learning?
Very. Beginners gain the most from a lock that is mounted properly, because all the feedback you feel comes from the pins and not from a bad setup fighting you.
Where can I use it?
On locks you own or have permission to practise on. Keep your picking to your own training cylinders and check your local laws on lock picking tools.
Mount the cylinder right and let the pins teach you
Stop wrestling the cam against the vice jaws. Seat the euro cylinder in this Lokko support, clamp it down, and pick with both hands free and honest feedback coming straight off the pins.
