Lokko Manual Pick Gun / Snap Gun
Entrega GRATIS
Entrega GRATIS
Los pedidos superiores a $40 tienen envío nacional GRATIS dentro de los estados contiguos.
Todos nuestros pedidos se empaquetan discretamente para su comodidad y se envían el mismo día o el siguiente día hábil desde nuestro almacén en Florida.
Puede elegir actualizar su envío al momento de pagar para una entrega más rápida (3 a 4 días).
El envío gratuito demora entre 5 y 7 días aproximadamente para entregarse en EE. UU.
Lokko Manual Pick Gun / Snap Gun está agotado y se enviará tan pronto como vuelva a estar disponible.
Guía básica de ganzúas GRATIS
Guía básica de ganzúas GRATIS
Cada juego de ganzúas recibe un PDF básico de 30 páginas sobre cómo abrir cerraduras que se le envía después de la compra del juego de ganzúas.
Como alternativa, puede comprar en la tienda nuestra Guía práctica ampliada y totalmente ilustrada de 60 páginas para pasar las páginas de manera más fácil y táctil y recibir orientación mientras aprende.
Acerca de este artículo
Acerca de este artículo
Descripción
Descripción
Snap the Pins. Feel the Bounce.
A manual pick gun is the classic kinetic route into pin tumbler locks. Hold light turning tension, slip the needle under the pin stack, and pull the trigger. The needle drives a sharp upward snap that bumps the driver pins toward the shear line all at once. When you catch that moment of separation, the plug turns. It is simple, lively gear, and a brilliant way to feel how kinetic picking works.
Kinetic picking, controlled by your trigger finger
New to pick guns? Here is the short version. A standard pin tumbler lock keeps a row of spring-loaded pin stacks pressed across the shear line, which is the gap between the plug and the housing. Pick a lock by hand and you set those pins one at a time. A snap gun takes a different route: it sends a single kinetic jolt up through the whole row so the driver pins jump clear together, and the plug turns in that split second while you hold tension.
This Lokko version is the manual kind. The energy comes from your trigger pull, not a battery, so you control the strength and the timing of every snap. That makes it a cheap, hands-on way to learn what kinetic feedback feels like before you decide whether a powered tool is worth it.
Tension first
Fit a tension wrench in the keyway and apply light, steady turning pressure. The plug should want to rotate.
Place the needle
Slide the needle under the pin stack. This UP version sits the needle to flick pins that sit above the keyway.
Snap and feel
Pull the trigger. The needle snaps up, the pins jump, and a clean snap with the right tension lets the plug turn.
One tool, two jobs: tension and timing
The trigger does the loud part, but the win is in the rhythm. Snap, reset, ease the tension a touch, snap again. You are reading how the plug responds to each jolt and finding the tension that lets the pins stay set instead of dropping straight back.
Keep your turning pressure light. Too much tension binds the pins so the snap cannot lift them, and too little lets them fall back the instant the needle clears. That balance is the skill, and a manual gun is a forgiving place to practise it because your finger sets the pace.
Give the gun a wrench and something to open
A pick gun moves the pins, but it cannot turn the plug on its own, so a tension wrench is essential. If your kit needs one, add the 5pc tension tool set. For visible, satisfying practice, pair it with the Dangerfield Eureka training locks so you can watch the pins behave. And when you are ready to let a motor do the snapping, the Dangerfield Machina Electric Lock Pick Gun is the EPG upgrade with adjustable power and rapid repeat snaps.
Specs and use notes
| Brand | Lokko |
| Tool type | Manual lock pick gun / snap gun |
| Action | UP action for pins above the keyway. Rotate the tool when the pin stack sits below the keyway. |
| Power | Manual trigger, no batteries required |
| Best use | Pin-cylinder practice and learning kinetic snap-gun feel |
| Technique note | Use a tension tool and light, controlled turning pressure. |
| SKU | GO-PICKG-MAN |
Questions buyers usually ask
What is a manual pick gun used for?
It is for pin-cylinder practice. A snapping needle bounces the pin stack while you hold light turning tension, so the plug can turn in the moment the pins jump clear of the shear line.
What do I need to use it?
A tension wrench. The gun moves the pins, and the wrench gives the plug the turning pressure it needs. If your kit does not have one yet, the linked tension tool set covers it.
What does the UP version mean?
It flicks the needle upward, which suits pins that sit above the keyway. For pins below the keyway, rotate the tool so the snap drives in the right direction.
Is this a good starting point?
It is a friendly one. Start on a simple practice lock, keep the tension very light, and let the trigger teach you how kinetic feedback feels. Results still come down to technique, tension, and the lock, so treat it as a skill you build.
How is this different from an electric pick gun?
Your hand powers this one, one snap per trigger pull. An EPG like the Machina uses a motor for rapid, repeating snaps and adjustable strength. This manual gun is the budget, mechanical way in. The EPG is the upgrade.
A mechanical route into pick-gun work
Fit the needle, set light tension with a proper wrench, and let the trigger teach you how kinetic feedback feels. Simple gear, lively snap, an honest first taste of kinetic picking.
